fronteSX_1200
fronteDX_1200
retro_1200
retroDX_1200
retroSX_1200
  • Dedicated transport
  • Inspection for feasibility installation
  • Course for the use of the machine
  • Course for the use of CAD/CAM software

The tutor will lead you to the mastery of the software, for the management of the machine and the design of the components.

* The cost is variable with the customer’s headquarters.

VOLUME AND WORKTOP WITH INTEGRATED TUB

Bridge passage = 140mm

Stroke x =600mm

Running y= 1010mm

Stroke z= 140mm

Equal to a working volume: 600x1010x140mm.

The worktop is made of grooved aluminium, dimensions 540×1040 thickness 18 mm. The particular quarrying works facilitates the mechanical bracketing operation to fix the materials to be worked. The presence of the tank below allows traditional dry processing but above all WET PROCESSING WITH THE INTEGRATED MINIMAL LUBRORICATION SYSTEM.

The bridge passage or the maximum height of the workable workpiece is 140mm. Generous 8mm carbon steel plates make up the shoulders of the bridge that is completed with 3 profiles in aluminum extruded. The ring structure of the bridge closes with the wagon of the Z-axis group.

THE ELECTRONICS OF CNC CONTROL

It is of our design (not import) and is in constant development on the basis of customer observations, an uncompromising solution to ensure a constant development and maximum reliability over time.

THE ELECTRONICS OF POTENZA

The main axle drive is made with STEPPER TRIPHASE motors with a maximum torque of 4.5Nm. This solution avoids boring mechanical resonances on the structure and allows for faster, smoother movements when compared to the bipolar standard engines of the competition.

The mechanics flow strictly on guides and ball-recirculation skates, the maximum of the technology available for the maximum durability over time.

If you wish, there is the possibility to connect any vacuum cleaner to keep the worktop clean from the machining chips. The suction crankcase to convey the chips to the vacuum cleaner tube is available as an accessory.

The standard mounted electrospindle is 1.6 kw professional MADE IN ITALY, air-cooled and controlled by inverter. Managed entirely by the control software installed on the machine.

Width = 960

Depth = 1400

Height = 1600

WEIGHT = 350kg

Fast speed = 6 m/min

ECO0510

da 3.500€ + IVA

The ECO0510 belongs to the line of laboratory milling machines ideal for artisan workshops that have to make prototypes and small series by milling. It has compact dimensions, but its electrospindle with 1.6Kw ER20 pliers of power to 18000 rpm is sufficient for any project. The optional presence of the underlying tank allows WET PROCESSING WITH THE MINIMUM LUBRORICATION SYSTEM. The performance of both electronics and mechanics is significantly improved compared to similar machines as it uses an Italian construction interface electronic board and also three-phase motors rather than the bipolar municipalities of the competition that guarantee much more fluid movements and less vibration. The machine is delivered ready for connection to the VS. PC.

The ECO0510 proves to be excellent for the processing of plastics, wood, plexiglass, light alloys, forex and dibonds, guaranteeing good results even in the case of engravings on marble with the right tools. Its versatility and robustness make it an ideal option for a wide range of projects. Equipped with good level electronics and mechanics, this 3-axis interpolated CNC pantograph is managed with professional control boards of our design and not import to guarantee reliability and developability over time.

For the most demanding we recommend the upper model CH1010 which has greater performance in terms of workable volume and speed as well as a wider range of accessories.

 

https://www.cnc-factory.com/ch1010/

CONTACT US